en 
Türkçe
Español
Русский
HVAC Machinery
Auto Duct Former (3 Feeder)
The Three-Entry Square Duct Machine is designed for high-efficiency production and is equipped with dual tracks, three drive systems, and a sheet straightening feature. Thanks to the PLC control system, the machine prevents dimensional errors in sheet metal processing and allows fully automatic operation.
With its hydraulic system, the machine provides strong and high-performance operation. It does not require a compressor or compressed air connection.
The label printing feature allows produced parts to be marked easily, which helps identification and organization during shipment. This improves the overall efficiency and quality of the production process.
Technical Specifications
- Full Automatic PLC Control
- 3 Pcs of Roll Carrier
- 2 Pcs of Trace Printing Unit (Sheet Metal)
- 1 Pc of Sheet Metal Straightener
- PLC System
- Hydraulic System
- Etiquette Printing Unit (Optional)
- Production Checking Memory System
Auto Duct Former (3 Feeder), has been exported to a total of 34 countries, including Morocco, Georgia, Kazakhstan, Lithuania, and Uzbekistan.
Technical Specifications
Technical Specifications
Technical specifications of the Three-Entrance Auto Duct Former Machine
| TECHNICAL INFORMATION | VALUE |
|---|---|
| POWER | 6 Kw |
| FREQUENCY | 380/400 VAC 50 - 60 hz 3 ph+PE |
| OILING | SEMI-AUTOMATIC |
| BENDABLE DUCT LENGTH | Min 100x100 |
| WORKING SPEED | 200x200 mm Production Speed 1 min/piece |
| MAX. PRODUCTION SPEED | 120 m²/hour |
| BENDABLE DUCT TYPE | Flat sheet metal, L type duct, U type duct, Square duct, S type duct |
| CLAMP TYPES | Pittisburg, Snaplock, Nulcok |
| UNCILER UNIT CAPACITY | Inner Diameter: Q 500 mm max, Sheet Width: 1400 mm, Roll Weight: 5 Ton |
| SHEET THICKNESS | From 0.50 mm to 1.2 mm / Galvanised From 0.5 mm to 1 mm Stainless Steel |
| TRACE TYPES | Trapeze Pattern - Z Pattern |
| HYDRAULIC OIL LEVEL | 90 Lt |
Machine Features
| FEATURE | INFORMATION |
|---|---|
| Bendable Duct Length | Min 100x100 |
| Max. Production Capacity | 120 m²/hour |
| Sheet Thickness | 0.50–1.2 mm / 0.5–1 mm |
| Roll Carrier Capacity | 5 Ton |
Product & Stock Code
| STOCK NAME | STOCK CODE |
|---|---|
| Auto Duct Former Machine (Three Entrance 1520 with 3x5 Ton Roll Carrier) | DFC KKM 0001 |
Frequently Asked Questions
What products can the Three-Entrance Auto Duct Former Machine produce?
It processes coil sheet metal to produce square and rectangular HVAC ducts. It can produce U-type, L-type and square ducts, as well as perform flat sheet cutting.
What sheet thicknesses can the machine process?
The machine can process galvanized sheet from 0.50 to 1.2 mm and stainless steel from 0.5 to 1 mm.
What are the production capacity and working speed?
For a 200x200 mm duct, the production speed is 1 minute per piece. The maximum production capacity is 120 m²/hour.
To how many countries has the Three-Entrance Auto Duct Former Machine been exported?
The machine has been exported to a total of 34 countries, including Morocco, Georgia, Kazakhstan, Lithuania and Uzbekistan.
Warranty and Technical Support
After-sales technical service and warranty coverage
Warranty
Covered by a 2-year mechanical and 2-year electronic warranty.
Technical Service
Technical service is provided within 1–3 business days in Türkiye and abroad.
Spare Parts
A 10-year spare parts supply guarantee is provided. Depending on stock availability, parts can be shipped on the same day.
01
Remote PLC and Automation Support
Through our internet-based automation system, machines can be accessed remotely to identify issues and provide immediate PLC and automation support.
02
Installation and Training
Installation, commissioning and operator training are included with delivery.
03
Warranty Coverage
During the warranty period, machine-related failures are covered for both required parts and service. Where necessary, travel and accommodation expenses are covered by DFC Makine.
